If your business still has phone lines delivered over copper wire, you have probably received — or soon will receive — a letter from your carrier announcing that the service is being discontinued in your area. This is not a rumor or a sales tactic. Across the United States, telephone companies are retiring the copper networks that carried voice calls for more than a century and moving customers to fiber, wireless and IP-based services.

This article explains what is happening, which devices in your building are most at risk, and how to plan the move so nothing important goes silent.

Key takeaways

  • Major carriers are actively discontinuing copper voice service, and federal regulators have made the process faster.
  • Ordinary business lines are easy to move; alarm panels, elevator phones, fax and some payment terminals need special attention.
  • Start with an inventory of every line and what is plugged into it — before a discontinuance date is set for you.

What is actually happening?

Copper telephone networks are expensive to maintain, consume a lot of power and are increasingly targeted by cable theft. Carriers would rather invest in fiber and wireless. In recent years the Federal Communications Commission has streamlined the rules that govern when a carrier may stop offering legacy copper services, and several carriers have received approval to discontinue service in large parts of their footprint.

AT&T, for example, has said publicly that it aims to move most customers off its copper network by the end of 2029, and has received FCC approval covering a large share of its wire centers, with discontinuances in many areas taking effect from late 2026. Other carriers, including Verizon, have pursued similar approvals. Some states — California is the most visible example — have rules that can slow the process, and those disputes are still being worked out between state and federal regulators.

What this means in practice

Timing varies by carrier, state and even neighborhood. The safest assumption is that any copper line you rely on today will need to be replaced within the next few years — possibly with only a few months’ notice.

How you will be notified

Carriers generally must give customers advance written notice before discontinuing a service, and they typically offer a replacement product: a fiber-based voice line, a fixed-wireless or cellular “home phone” style service, or a move to VoIP. Read these notices carefully. They usually include:

  • The affected service and the date after which it may be discontinued.
  • The replacement services available at your address.
  • A contact number or portal for questions and ordering.

Do not ignore the letter in the hope it applies to someone else. Forward it to whoever manages your phones, alarms and building systems.

Which devices are most at risk?

Plain voice lines are the easy part. The hard part is everything else that quietly uses a phone line:

Device Why it matters Typical replacement
Fire alarm panel Life safety; often required by code and inspected by the fire marshal Listed cellular or IP communicator approved by your local authority
Burglar / intrusion alarm Monitoring center must receive signals reliably Cellular communicator; dual-path (cellular + IP) for higher security
Elevator emergency phone Required for passenger safety Elevator-specific cellular or VoIP solution with battery backup
Fax machines Fax over VoIP can be unreliable without the right settings Cloud fax service or ATA configured for T.38
Point-of-sale / card terminals Some older terminals dial out IP or cellular-enabled terminals
Door entry / gate phones Access for visitors and deliveries SIP intercom or cellular gate controller
Building automation, meters, SCADA Remote monitoring of equipment Cellular modems or IP connections

Your 6-step migration plan

1. Inventory every line

Get a Customer Service Record (CSR) or detailed invoice from your carrier listing every billed line. Then physically trace where each line terminates. It is common to find lines nobody remembers — and equally common to find a critical alarm line that nobody listed.

2. Classify each line

Label lines as voice, life-safety, data/fax or unused. Cancel the unused ones now; it often pays for part of the migration.

3. Choose replacements by category

Voice lines typically move to VoIP or a cloud phone system — see VoIP vs. landline and our buyer’s guide. Life-safety devices should be handled with your alarm or elevator contractor and approved by the authority having jurisdiction where required.

4. Plan power and resilience

Copper lines carried their own power. Replacements usually do not. Put modems, routers, switches, ATAs and communicators on battery backup, and confirm how long they must run during an outage (alarm and elevator equipment may have specific requirements).

5. Port your numbers and update 911

Port published numbers to the new service rather than letting them be disconnected. Register correct 911 dispatchable locations for every new line or device, as required for business phone systems under RAY BAUM’S Act (FCC overview).

6. Test, document and only then cancel

Test each replacement: place calls, send test alarm signals, run elevator phone tests, send faxes. Document what changed and where equipment lives. Cancel the old copper service only after every test passes.

Common mistakes to avoid

  • Waiting for the deadline. Installers get busy as discontinuance dates approach.
  • Plugging an alarm panel into a VoIP adapter without checking that the monitoring center and manufacturer support it.
  • Forgetting battery backup for the new equipment.
  • Losing numbers because a line was cancelled before it was ported.
  • Not updating 911 addresses when equipment moves.

Is there any upside?

Yes. Most businesses that complete the move end up with lower costs, more features (auto attendants, mobile apps, voicemail-to-email) and better visibility of their communications. Life-safety devices on modern dual-path communicators are often more reliable than a single copper pair that could be cut. And you get to retire equipment that, in many offices, has been on borrowed time for years.

Frequently asked questions

Can the carrier really disconnect my line?

Carriers must follow federal and state procedures, including customer notice, but once approved they can discontinue legacy copper service in an area. Replacement services are usually offered.

Will my old phone number change?

No, as long as you port it or accept the carrier’s replacement service before the copper service ends. Do not cancel first.

What about my home landline?

The same retirement applies to residential copper service. The carrier will typically offer a fiber or wireless home phone replacement.

Got a copper retirement notice?

We inventory your lines, plan replacements for voice, alarm and fax, and port your numbers without downtime.

Plan my migration